Welcome to this website!
  • neye

News

  • Failure to implement lockout/tagout results in partial amputation

    The plant was found to have failed to train its workers on the importance of locking/tagging in maintenance activities. According to the Occupational Health and Safety Administration, BEF Foods Inc., the food producer and distributor, does not go through the lockout/tagout program during routine ...
    Read more
  • keep it simple – Lockout/tagout procedure

    Adopting these techniques can be the difference between safe routine maintenance activities and serious injuries. If you have ever drove your car into the garage to change the oil, the first thing the technician asks you to do is to remove the keys from the ignition switch and place them on the d...
    Read more
  • Lock out tag out – Staff classification

    Lock out tag out – Staff classification 1} Authorize employees — execute Lockout/tagout 2} Affected employees — Know hazardous energy/stay away from hazardous areas Ensure employees understand: • Device components are controlled by stop/safety buttons • Energy sources other than...
    Read more
  • No Lockout/tagout cases required

    No Lockout/tagout cases required 1. Power is provided by electrical sockets and/or air quick cutters, and 2. Staff sole control of electrical sockets and/or quick air cutters when performing tasks on machine facilities, and 3. No potential storage or residual energy (capacitors, high pressure gas...
    Read more
  • LOTO- Temporary electricity

    LOTO- Temporary electricity The setting of “one machine, one box, one switch, one leak” is not pressed for temporary power use “One box, one machine, one switch, one leak” refers to the specification of temporary electricity, meaning that each mechanical equipment must hav...
    Read more
  • LOTO-Machinery safety

    Machinery safety 1. Before intervening in the mechanical equipment, be sure to use the normal stop button to stop the machine (rather than emergency stop or safety chain door bar), and make sure that the equipment has stopped completely; 2. In mode 2 operation (the whole body enters the safety c...
    Read more
  • Lockout tagout -11 key principles

    The following 11 key principles should be followed at all times with regard to opening and parking: 1. After each emergency stop, formulate driving operation rules, such as: Conduct and complete a thorough pre-start safety check After stopping, open lines and equipment following correct safety pr...
    Read more
  • Loto – Memorize the Ten Principles

    Remember the ten principles Two preparation tasks: Personal protective equipment and site isolation 5 items that can be observed in the machine room: Lifting operations, stored mechanical energy, locking and latching, live operations – troubleshooting and short wiring Three things can be ob...
    Read more
  • Lockout Tagout (LOTO) training board

    【 Lockey Products and Services 】 Lockout Tagout (LOTO) training board First, product functions Training board through the chemical production process of liquid, gas, steam and chemicals in the simulation of various valves, as well as the simulation of various switches and buttons in the circui...
    Read more
  • Bottling Plant Loto Incident

    Bottling Plant Loto Incident The accident happened at a bottling plant in Florida. The employee’s first day on the job turned out to be his last. Here is a palletizer, a machine that packs rum and stacks it on pallets. The man in the picture above is operating the machine. He needs to cle...
    Read more
  • Photovoltaic power station LOTO

    Photovoltaic power station LOTO Safety begins with adequate planning and preparation. To prevent accidents or injuries, an effective safety policy must be in place and plant personnel and contractors must be familiar with and strictly follow the following safety procedures. Important safety requi...
    Read more
  • Loto-lock out Tag out security check

    Loto-lock out Tag out security check

    Loto-lock out Tag out security check Execution steps of locking program: Inform all may be affected employees, clearly know the source of energy, the most important step is to know about the potential energy of the machine, observe all the connection machine hole \ tube, etc., do not believe that...
    Read more