Prevention of mechanical injury accidents

Prevention of mechanical injury accidents
1.Equipped with intrinsically safe mechanical equipment Intrinsically safe mechanical equipment is equipped with automatic detection device. When there are human hands and other limbs under the dangerous parts of mechanical equipment such as knife edge, the equipment will not move even if someone mistakenly touches the equipment switch, so as to protect the safety of personnel.

2.Strengthen the management of mechanical equipment and operators 1, develop detailed mechanical equipment operation procedures, and strengthen the training of equipment operators, so that workers improve safety awareness, realize the risk factors in the process of operation.

3.For the staff with qualified personal labor protection supplies, and urge the staff to use correctly.

4. Strengthen the management of the equipment operation area, clean up the sundry in time, and keep the operation area clean and tidy and the passage unblocked. 4. Check the mechanical equipment regularly, deal with the hidden dangers and problems of the equipment in time, so that all kinds of safety protection measures of the mechanical equipment are in good condition.

5.Create a good working environment operators should pay attention to the rest time, have a good rest, keep in good condition.

There must be a shaft cover: there should be a protective cover for the rotating roller, to prevent the hair, collar, cuff, etc. of the staff from being involved in the damage, such as the roller of the line head of the workshop, the drive shaft of the lathe, etc.

There must be a cover: there are belt pulley, gear, chain transmission dangerous parts, must have a fixed protective cover, such as the belt pulley drilling machine, bicycle chain parts.

There must be a bar: there must be a edge, edge equipment and auxiliary tools along the edge of the guardrail. If the height of the equipment platform is more than 1.2 meters (inclusive), protective guardrail shall be set up; The height of the guardrail below 2 meters is not less than 0.9 meters, and the height of the guardrail above 2 meters is not less than 1.05 meters, such as large injection molding machine feeding platform.

Hole must cover: there are holes in the equipment, the hole must have a cover, such as the hole on the side of the beer machine.